From:Shane Neitzey e-mail:shanessigns-A-mindpsring.com
Subject:RE: Work on WL Date:Fri Mar 26 09:58:22 2021
Response to:1998
Hello Dave,

Did you try Resurrection Cycle for a frame?

Shane

----- ORIGINAL MESSAGE FOLLOWS -----
I've been diving down a bit deeper into the bike. I've
ordered new copper-core spark plug cables and new spark
plugs (18mm). I was removing the 18mm to 14mm adapter on
the front head and it snapped off. I'll be removing the
heads this weekend and take them down to a machine shop
to get tapped and cleaned up. I have noticed many missing
small items, especially grease fittings. I've replace all
the missing fitting on the front fork and lubed it. I
found two (of four) snapped off bolts that hold the back
of the air cleaner on the carb. I will have to drill and
tap those out as well. I will be removing the gas and oil
tanks this weekend also to get better access to the heads
as well as do a good flushing. So, before I get this out
on the road I will:
- Rewire the electrical (I've found a lot of dodgy
wiring.
- Flush the gas and oil tanks.
- New oil in engine an gearbox.
- Install a heel/toe clutch pedal.
- Rebuild the carb.
Lot's to do.

David